Osmosis Units

The Aqua Medic Easy Line reverse osmosis units are compact and powerful and fulfill the highest demands for water quality. A sediment filter retains all particles lager than 5 µm and a carbon filter protects the membrane by removing chlorine. The R.O.

The Aqua Medic Reverse osmosis system is ideally for the production of soft water with low-salt content for fresh and salt water aquaria, for spraying terrariums and many other applications. This unit comes with an powerful high pressure pump for increasing the capacity up to 400 l of osmosis water per day. The reverse osmosis system platinum line plus is a compact and versatile superior unit.

The Aqua Medic Merlin plus (PRF-RO) is a robust and powerful reverse osmosis system with a daily capacity of up to 2000 litres. The Merlin plus (PRF-RO) reverse osmosis unit operates using just the mains pressure of the tap water (3 - 4 bar), without the need for a high pressure pump. It has 2 high flow membranes and a combined activated carbon/sediment prefilter.

The Aqua Medic easy line professional reverse osmosis units are compact and powerful and fulfill the highest demands for water quality. A sediment filter retains all particles larger than 5 µm and a carbon filter protects the membrane by removing chlorine. The module consists of a membrane, pressure pipe and flush valve.

FilterMaster OSMOPower 2.0 is a professional and complete 3-stage reverse osmosis unit for aquariums. The system supplies soft, high-purity water and removes pollutants, hardeners, viruses, bacteria and other undesired substances from tap water - which is essential for the adjustment of species-appropriate water values for freshwater and seawater aqauriums.

FilterMaster active carbon filter cartridge for the OSMOPower 2.0 osmosis system. The active carbon filter removes pesticides, herbicides and any chlorine from the tap water. Double-sided 1/4 inch connection for 4/6 mm pressure hose, length: 25 cm.

The FilterMaster Ultrapur Resinfilter expands the OSMOPower 2.0 Osmosis system to a 4-stage system. It is not possible to neutralise particularly hihj values of individual substances using the reverse osmosis. For example, a high level of silicic acid or nitrate.

FilterMaster Osmosis replacement membrane for the OSMOPower 2.0 reverse osmosis unit. Special membrane consisting of a multi-layer polymer film with fine pores only 0.0001 µm in size. This membrane allows only the small water molecules to pass through.

Tap water connector for reverse osmosis units suitable for all tap water valves with 3/4 inch thread. High quality, incl. sealing ring, suitable for all osmosis units with 4/6 mm tubing.

Solenoid valve for water with 3/8 inch thread on both sides. For universal use, e.g. with osmosis units, water refill systems, filter systems etc.

The Aqua Medic activated acrbon filter is used to remove chloride, organics and sediments before reverse osmosis. It can also be used in combination with the 5 µm sediment filter prior to reverse osmosis. The delivery of the filter is complet with fittings.

The Aqua Medic fine filter is designed for the removal of fine sediment particles. The delivery of the fine filter is complet with fittings. Suitable for the Aqua Medic reverse osmosis units Easy-Line or any other reverse osmosis unit.

Original Aqua Medic replacement membrane for reverse osmosis unit Platinum Line also suitable for Aqua Medic easy line 100. Aqua Medic spare part no: U711.100.

Aqua Medic replacement membrane for reverse osmosis units with a capacity of 300 l per day. Universally suitable for the Aqua Medic reverse osmosis units or any other osmosis unit.

The Aqua Medic Demineralisation filter is used to remove the last remaining pollutants using a special ion exchange resin, and is placed after the reverse osmosis unit. It reduces the growth of diatom, if silicate level of tab water is too high. The Aqua Medic Demineralisation filter is filled with Aqua Medic demineralisation ion resin.

Aqua Medic housing for filter cartridges 10" empty. Suitable for all Aqua Medic filter cartridges. The delivery is complete with fittings, but without any filter cartridge.

Aqua Medic indicator-resin is a mixed bed demineralizer for removing silicate, nitrate and other ions from osmosis water. The special silicate resin helps to limit the growth of diatoms, especially for the aquarium hobby. Aqua Medic indicator-resin is used to remove the last remaining pollutants from RO water, by using ion exchange resin as the final stage on a reverse osmosis unit.

Aqua Medic combined filter cartridge activated carbon/Fine-prefilter for the 10" filter housing.

Ion exchange resin cartridge for reverse osmosis system platinum line plus - with colour indicator. Aqua Medic RO-resin cartridge is used to remove the last remaining pollutants from RO water such as silicate, nitrate and other ions, by using ion exchange resin as the final stage on a reverse osmosis unit. It reduces the growth of diatom, if silicate levels in tap water are too high.

Aqua Medic tap Connector is a switchable water tap connection for the operation of osmosis units. The water tap connection can be connected (without adapter) to water taps with ½ inch external thread or (with adapter) M24 internal thread. A side connection allows the connection of an osmosis unit with a standard pressure hose.

Replacement fine filter for the Dennerle osmosis systems Compact 130, Professional 190 and professional 380. You will notice whether the fine filter is blocked if the flow rate declines significantly. Please turn on the tap water and measure the volume of water flowing out of the outlet of the fine filter.

Replacement active carbon filter for the Dennerle osmosis systems Compact 130, professional 190 and professional 380. The avtice carbon filter should be replaced once per year, in case of heavily chlorinated tap water ( smells of chlorine!) every 6 months.

Fitting straight with 1/4 inch thread and connector for osmosis tubing. Suitable for Dennerle Osmosis units and Osmosis units from other brands.

Dennerle water tap connector with 3/4 inch thread for the connection of an osmosis unit to an water tap. Suitable for all osmosis units.

The Aqua Medic Top End Filter is a ready to use demineralization filter for removing silicate, nitrate and other ions from osmosis water. Since silicate and nitrate are very small ions, they are held back to a lesser extent by osmosis systems. The Aqua Medic Top End Filter is placed directly behind the reverse osmosis unit so that any remaining silica is removed from the ultrapure water.

Aqua Medic antibac filter is a highly effective filter for osmosis units to remove germs and bacteria. The Aqua Medic antibac filter serves as a germ barrier for osmosis units. Its capillary membrane removes unwanted bacteria, parasites, spores and fungi from the reverse osmosis water.

JBL Replacement carbone filter for the JBL Osmosis 120. The carbone filter has a lifetime of approx. 5-12 months and should be changed regularly.

The JBL Replacement fine filter is extremely important adn should be cahnged every 5-12 months. The Fine filter prevents damage to main membrane from particles floating in water. The lifetime of the main membrane will be increased significantly.

JBL Replacement membrane for the JBL Osmosis 120. The membrane can be stored dry for 2 years. The lifetime of the membrane is 1-8 years depending on water quality (prefilter should be changed regularly !).

For a longer service life of the thin-film composite membrane of the TUNZE Nano RO Station, we recommend replacing the Carbon Block filter every three months or after the production of 400 litres of purified water, in particular if the reverse osmosis water is used for preparing food. TUNZE No. 8515.120.

TUNZE Carbon Sediment filter 5 µm for the TUNZE Osmosis unit RO Station. In order to ensure the best possible removal of impurities and to protect the membrane against premature destruction, the sediment filter and the preliminary filters should be replaced in regular intervals of six months. TUNZE No.

Solenoid valve for water with 3/4 inch connection for the water tap and on the other side a plug-in connection for the 4/6 mm omose hose. The solenoid valve can be used universally, e.g. for osmosis systems, water refilling systems etc..