 |
Actual product may vary from the image shown.
-
Com o módulo de nível de água (sistema de nível automático), é possível assegurar de forma totalmente automática um nível de água constante no aquário. O interrutor de boia utilizado é instalado dentro de um invólucro protegido das ondas para evitar que uma bomba se ligue e desligue desnecessariamente. No caso improvável de o interrutor de boia falhar, pode ser acionado um alarme temporizado para evitar inundações na sua sala de estar. Isto significa: se o nível especificado não for atingido num determinado período de tempo, a bomba será desactivada preventivamente. O tempo de alarme para isso depende da bomba conectada e pode ser facilmente definido como o utilizador deseja.
Dados técnicos IKS Módulo de nível de água com sensor:
Histerese do interrutor: aprox. 2 mm
Pode ser programado até oito processos de controlo
Alarme temporizado para máxima segurança. -
Reviews for IKS Módulo de nÃvel de água com sensor:
Write a reviewPascal G. at 01.01.2016:
I installed this water level in my tank few weeks ago and it works like a charm! It is fantastik!Very easy set up... I use it with a IKS computer and a Aquastar Vario 4 dosing pumps. I save the water in 25l jerrycan.
2 remarks:
1. the pump works at any time of day and night - the computer doesn't let you set up a time span to authorize the pump activation. I will be pleased if it was possible to set the computer to check the level only between 02:00 and 05:00 AM. So you are not disturbed by the noise during the day.
2. the computer should know when the jerrycan is almost empty and let you know (alarm or flashing). It is easily done by entering the pump debit and the volume of the jerrycan, then the computer should be able to keep a counter of the water passed in the pump... (hope this make sens).
Your question: IKS Módulo de nível de água com sensor
- Pascal G. wrote about IKS Módulo de nÃvel de água com sensor in 2016:
I installed this water level in my tank few weeks ago and it works like a charm! It is fantastik!Very easy set up... I use it with a IKS computer and a Aquastar Vario 4 dosing pumps. I save the water in 25l jerrycan.
2 remarks:
1. the pump works at any time of day and night - the computer doesn't let you set up a time span to authorize the pump activation. I will be pleased if it was possible to set the computer to check the level only between 02:00 and 05:00 AM. So you are not disturbed by the noise during the day.
2. the computer should know when the jerrycan is almost empty and let you know (alarm or flashing). It is easily done by entering the pump debit and the volume of the jerrycan, then the computer should be able to keep a counter of the water passed in the pump... (hope this make sens).
