 |
Actual product may vary from the image shown.
-
Dados técnicos EHEIM Bomba Universal 1048:
- Consumo de energia 230 V/10 W (outras tensões a pedido)
- Cabeça da bomba: 1,50 m
- Débito da bomba: 600 l/h
- Comprimento do cabo de alimentação: 1,7 m
- Lado de sucção do conetor: 12/16 mm
- Lado de pressão do conetor: 12/16 mm
- Dimensões: (comprimento x largura x altura) 147 x 75 x 118 mm
- adequada para água doce e água salgada
- para uso dentro/sob e fora da águaA bomba universal EHEIM 1048 oferece um amplo espetro de potência e usos versáteis. A bomba também apresenta excelentes características de funcionamento contínuo. A bomba universal eheim 1048 pode ser usada dentro e debaixo de água, em água doce e marinha. Também pode ser utilizada fora de água. A bomba tem um corpo de motor hermeticamente selado. Isto garante a máxima segurança e uma longa vida útil. O pré-filtro integrado impede a entrada de objectos no impulsor e garante um desempenho prolongado. O conetor de entrada foi concebido para uma ligação segura da mangueira. O conetor de pressão permite a utilização de acessórios interessantes, como o kit de instalação 2. Ambos os conectores podem ser retirados da bomba. Por conseguinte, é possível uma instalação com tubos de pvc. A placa de montagem fornecida permite diferentes opções de montagem.
- Accessories for this article:
Please click the description in the table, or the number in the picture for selecting a spare part.
Nr. spare part 2615485 EHEIM Coarse filter 1048 726440 EHEIM O-Ring 1048 726445 EHEIM Intake screen 1048 726450 EHEIM Mounting plate 1046 726455 EHEIM Sealing cover 743372 EHEIM Shaft with bushing 743820 EHEIM Threaded connector G 3/8" 744030 EHEIM Threading connector pressure side 744031 EHEIM Connector with O-Ring 744035 EHEIM Pump housing with bushing 764595 EHEIM Impeller 50 Hz 1048 764598 not available 400956 EHEIM Set of Cleaning brushes for pump housing -
Reviews for Bomba universal EHEIM 1048:
Write a reviewKonstantinos S. at 18.02.2016:
I bought this pump for my cooling system (teko chiller). Because of the low flow of my external filter (eheim ecco pro 200) I made a separate circuit for cooling and for circulation I decided that eheim 1048 was the best choice. The aquarium is located inside the living room so the low working level noise is the most important thing for me.I made an order in an e-shop in Greece and because of the unavailability of this part I bought at the same time from the Aquaristik shop. After a month I had in my hand two of these pumps. I had to connect one of the pumps in the cooling circuit and after that the water started to run inside the tank through the chiller.
The system had running without problems for about two months and then the pump was started to make a mechanical noise. Day after day noise tended to be louder and louder. I tried to clean and lubricate all the parts like propeller but nothing. So finally I put around the pump two leaves insulating foam, and the noise decreased but not disappeared.
The noise level was enough annoying, so I replaced the pump with the other one. After two months the same happened. Neither the lubrication with the original lubricant spray of eheim, neither the good cleaning of all of the parts of cooling system helped me enough. The noise remains until now.
Manual Bomba universal EHEIM 1048
Your question: Bomba universal EHEIM 1048
