Water Tests Sera

The sera aqua test-box marin is a profi test set for exact determining of 8 important water values in marine water. The set contains the tests:-pH value-KH carbonate hardness-NO² nitrite-NO³ nitrate-NH4/NH3 ammonia/ammonium-PO4 phosphate-Ca calcium-Cu copper- coloure charts and detailled manual.

The sera aqua test-box is a profi test set for exact determining of 9 important water values in fresh water aquarium or garden pond. All important tests are included.

sera aqua-test set for the exact determination of the four importent water values in aquarium or garden pond: total hardness (GH), carbonate hardness (KH), pH value and nitrite (NO²) content. With detailled instructions for use and cloure chart.

sera Test NH4/NH3 for the exact determination of the ammonium/ammonia content in fresh or marine water. The test is sufficient for approx. 60 tests.

sera test NO2 nitrite for the xact determination of the nitrite content in fresh and marine water. The test ist sufficient for approx. 75 test.

sera Test NO3 nitrate for the exact determination of the nitrate content in fresh and marine water. The test is sufficient for approx. 60 tests.

Sera CO2 test carbone dioxide for the permanent testing of the CO2 value in the aquarium water. The optimal CO2 content is very important for a good plant growth and the right living parameters of your fish. The package content is sufficient for approx.

Sera Test-Set Ca for the exact and reliable determination of the calcium content in sea water. The sera test Ca is very exact and shows the calcium content in steps of 20 mg/l. The test is sufficeint for approx.

Sera Test Cu Copper for the exact determination of the copper content in the aquarium water. The test is sufficient for approx. 50 test.

Sera Test Fe iron for the exact determination of the iron content in the aquarium water. The test is sufficient for approx. 75 test.

Sera Test PO phosphate for approx. 60 measurements in fresh and marine water. Phosphate strongly promotes algae growth.

Sera test Cl chloride for determining the chloride concentration in fresh and marine water or tap water. Chloride is corrosive and damages the fishs mucuos membrane. The sera test Cl is sufficient for approx.

Sera Test GH for the exact determination of the total hardness in fresh or marine water. The test is sufficient for 420 °dGH. Most ornamental fish kept in aquariums originate from areas with soft water.

Sera KH Test for the exact determination of the carbonate hardness in fresh or marine water. The test is sufficient for 390 °dKH. In a community aquarium the carbonate hardness should be between 5 and 10 °dkH (saltwater 8 to 12 °dkH) in order to guarantee sufficient pH value stabilization.

Sera pH test for approx. 80 measurements in fresh or marine water. Tap water usually has a pH between 7.5 and 8.5.

Indicator solution for refilling the sera CO² - permanent test.

In case of high calcium levels in saltwater aquaria the reagent 3 in the sera Ca-Test will be used up, while the remaining reagents still contain sufficient liquid. With the refill reagent 3 you can continue using your sera Ca-Test.

Sera oxygen test O2 to the reliable and exact determination of the oxygen content in the fresh and sea water. You can see the oxygen content of the aquarium water within minutes. Packing contents sufficiently for approx.

Sera test magnesium Mg to the reliable and exact determination of the magnesium content in the sea water.

Silicate supports the growth of diatoms in salt and freshwater aquariums. The sera silicate test allows you to monitor the silicate level reliably. Silicate levels above 1 mg/j should be bound with sera silicate clear.

With the Quick Test 6in1, sera offers the optimal possibility to check the most important water values (pH value, carbonate hardness, total hardness, nitrate, nitrite and chlorine) in the aquarium quickly and easily with only one test strip.