 | The Aqua Medic pH monitor is a precision instrument for controlling permanently the pH value in aquaria. The LED display continuously shows the current pH value of the aquarium water. The measuring range covers pH-values from 0.00 to 14.00.
| |
|
 | The Aqua Medic pH Computer-Set utilises a modern microprocessor, which provides high precision measurement and control. The Aqua Medic pH Computer-Set is used to control precise values of pH in the aquarium or the Calciumreactor. The computer can switch up to 500 watts using the supplied external electrical socket.
| |
|
 | The Aqua Medic mV Computer-Set uses the same microprocessor technique as the Aqua Medic pH Computer-Set. Waterproof touch keys are used to set the required values and calibrate the electrode. The Aqua Medic mV Computer-Set is ideal for controlling anaerobic biological filters such as the Nitratereductor which have negative redox potential or can control the supply of ozone to the aquarium, or monitor the aquarium waterÂ’s redox potential.
| |
|
 | The Aqua Medic pH Controller is a precision instrument for controlling the pH value in aquaria. In combination with a CO2 system and a solenoid valve the pH can be maintained at a constant level, and the CO2 supply to aquatic plants can be controlled. The unit is supplied with a large LED display and the control range is digitally adjustable from pH 3.5 to 10.5.
| |
|
 | The Aqua Medic mV Controller is designed for monitoring and controlling the redox potential (or ORP - oxidation-reduction potential) in aquaria. The unit has a broad controlling range from -500 to a +500 mV, and a measuring range from -1000 to +1000 mV. It can be used to control the supply of ozone in saltwater aquaria and / or for the control of nitrate removal in anaerobic biological filters (Nitratereductor).
| |
|
 | With the Aqua Medic LF Controller you can measure and control the conductivity of your aquarium water as a parameter of the salt content continuously. The salt content of water can be determined by measuring the electrical conductivity. A special feature of the Aqua Medic LF Controller conductivity monitor and controller is the broad measurement and control range which is divided into 2 bands: from 0 to 2000 µS, the unit is used for monitoring desalinated water and freshwater, and in the range 0 to 200 mS, it is used for brackish and saltwater.
| |
|
 | The ab Aqua Medic T Controller HC is a digital temperature monitor and controller which comes with an seawater resistant temperature probe. It is to be used to control heating systems. The control range varies from 15,2 - 50 °C, with an precision of 0,1 °C.
| |
|
 | Aqua Medic pH electrode is a quality pH probe with plastic shaft and BNC connection for an long trouble free operation use and accurate measurements. Length up to the head: 127 mm, incl. head: 159 mm.
| |
|
 | Aqua Medic redox (mV) electrode with plastic shaft and BNC connector for an long trouble free operation and accurate measurements. Length up to the head: 120 mm, incl. head: 160 mm.
| |
|
 | The accurcy of all electrodes is dependent on their calibration. To ensures accurate values, all electrodes need to be calibrated at regular intervals. To ensure that the fluid values used to calibrate the electrodes remain constant, regular replacement of these fluids should occur.
| |
|
 | Aqua Medic Cleaing fluid for the cleaning and care of measuring electrodes.
| |
|
 | Aqua Medic KCL Fluid for pH and mV electrodes. With this storage fluid, the electrodes can be saved for drying out if the probes are not in use.
| |
|
 | Aqua Medic test fluid 230 mV for the calibration of redox electrodes.
| |
|
 | Aqua Medic test and calibration fluid 250 µS/cm for conductivity electrodes.
| |
|
 | Aqua Medic test and calibration fluid 50 mS/cm for conductivity electrodes.
| |
|
 | Aqua Medic valuable electrode holder for use with up to 2 electrodes, easily attaches to the aquarium. The level of submergence of the electrodes is fully adjustable. No electrodes included.
| |
|
