 | The Schego temperature controller can be loaded up to 2000 watts and because of ist simple handling is ideal both for the hobby aquarium owner and for the professional user. The aquarium heater is simply connected to the socket of the controller and the required temperature is set on the LC display. The temperature in the aquarium is measured using a temperature probe (cable length 2 m).
| |
|
 | The SCHEGO Titanium heater is shatterproof and absolutely sea-water resistant. Titanium delivers the warmth substantially better to the water than conventional glass heating staffs. For the professional application in the fresh and sea water aquarium.
| |
|
 | The novel PTC aquarium heaters made of titanium tubing are particularly energy-efficient, as their output depends on the heat extraction. If a lot of heat is extracted from the heater, it readjusts its temperature independently and increases its output. As soon as it reaches its maximum temperature, the power decreases again and hardly any current flows.
| |
|
 | SCHEGO Suction cups for Titanium Heater. Content: 2 suction cups complete with clip holder.
| |
|
 | The Schego Pond Heater protects the garden pond for complete freezing during permanent temperatures under 0°C. Even in winter, life continues in the garden pond. If it freezes over, however, the ongoing decay of dead plants, etc., can lead to the production of toxic gases that are poisonous to water animals and pond plants.
| |
|
 | Replacement Floater for the Schego Pond Heater suitable for all wattages. Dimensions: 200 x 100 x 50 mm.
| |
|
 | The Schego Frost Monitor will activate a connected device (Schego Pond heater, air or water pumps etc.) as soon as the temperature falls to approx. 0°C or and will switch it off again when the temperature rises above freezing point.
| |
|
