With socket on every site. This ball shut-off valve is equipped with adhesive sockets on all 3 sides and can also be removed by means of the screw fittings. Due to the ball technology, the flow rate can be adjusted very precisely.
 |
Actual product may vary from the image shown.
-
With socket on every site. Removable. This ball shut-off valve is equipped with adhesive sockets on all 3 sides and can also be removed by means of the screw fittings. Due to the ball technology, the flow rate can be adjusted very precisely. Please note: the thread of the ball valve can not be combined with threaded fittings and differs from manufacturer to manufacturer.
PVC 3-way ball valve
- ball and spigot hole polished - basic requirement for smooth operation and durable tightness
- P.T.F.E. (Teflon) ball seat: resistance to most acids and alkalis
- O-rings EPDM 70 shore
- working pressure 10 bar (150 psi) at 20°C
- temperature resistance up to 45°C constant, briefly up to 60°C
- T-Hole
available in the following sizes:
16 mm
20 mm
25 mm
32 mm
40 mm
50 mm
63 mm - ball and spigot hole polished - basic requirement for smooth operation and durable tightness
- Accessories for this article:
-
- Lars E. wrote about PVC 3-Way Ball Valve T-Hole in 2019:
Is the 50mm valve for having a 50mm pipe inserted and glued inside the valve socket?
Aquaristikshop.com: Yes, the piping is clued into the valve socket.- Lars E. wrote about PVC 3-Way Ball Valve T-Hole in 2019:
Is the 50mm valve for having a 50mm pipe inserted and glued inside the valve socket?
Aquaristikshop.com: Yes, the piping is clued into the valve socket.
Your question: PVC 3-Way Ball Valve T-Hole
|
|
|
 
| |||
|
| ||||
|
© Happy Diskus - e.Kfr. 1998-2024. All rights reserved.. *All prices including VAT, plus shipping costs. | ||||
