 |
-
The JBL ProAqua Test SiO2 Silikate is designed for measuring and routinely controlling the silicate content in saltwaterand freshwater within the range of 0.2 - >6 mg/l. The compensation method developed specially by JBL allows precise and reliable results to be obtained even in moderately discoloured aquarium water e.g. caused by peat filters and disease treatment. Any possible interference due to the presence of phosphates in the water sample are eliminated by the delayed addition of reagent 2.
Silicon is one of the most common elements in the world. As a result of weathering of silicate rocks, silicon is washed into surface and ground water in the form of silicate. Depending on the composition of the rocks in a particular area, the mains water will contain up to 40 mg/l and, on rare occasions, even more. Silicate is non-toxic and there is no threshold set in the regulations governing the aquality of drinking water.
The significance of silicon for aquariums is as a nutrient for algae (diatoms), some aquatic plants (e.g. hornwort) as well as sponges (e.g. Tetraxonida) and many other invertebrates. When a new aqaurium is set up, the first sign of settlement is a brown coating of algae (diatoms). This coating disappears when the aquarium is run in and sufficient competition from other algae and micro organisms has established itselfs. This also significantly reduces the amount of silicate in the aqaurium water. However, such coatings of algae can often reappear, particularly in saltwater, after the water has been changed, adding new silicate. For freshwater approx. 1 mg/l to 2 mg/l can be tolerated, for saltwater max. 1 mg/l.
JBL ProAqua Test SiO2 Silikate
- Silicate test for freshwater and marine water
- colour scale measurements: <0.1 | 0.2 | 0.4 | 0.8 | 1.2 | 2.0 | 3.0 | >6.0 mg/l
- sufficient for approx. 50 tests
- for freshwater and saltwater
You can oder the complete test kit with coloure chart and test accessories or only the reagents at the refill kit.
Manual JBL ProAqua Test SiO2 SilikatePrecaution:
Signal world: Danger
Hazard statements:
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with national regulations
- Silicate test for freshwater and marine water
-
Your question: JBL ProAqua Test SiO2 Silikate
