-
The HANNA pHep pH Tester (HI98107) features a large multi-level LCD which displays both pH and temperature readings simultaneously. The pH readings are displayed with a 0.1 pH resolution and with an accuracy of ±0.1 pH. The pH range of the HANNA pHep is from 0.0 to 14.0 pH. An exposed temperature sensor allows for rapid automatic temperature compensated pH measurements. Temperature can be set to display in ? or ?. The LCD screen has stability and calibration tag indicators. The battery percent level is displayed at start up alerting the user to the remaining battery power that is available. The pH electrode of the HANNA pHep uses a unique reference cell design that utilizes a cloth junction that provides a larger surface area than a standard ceramic junction. Calibration is performed by pressing the dedicated calibration button. Once in calibration mode the pH electrode can be calibrated to 1 or 2 points using the pre-programmed standard buffers (pH 4.01, 7.01,10.01). When the standard value is recognized and stability is reached, the meter automatically accepts and stores the calibration value. Setup options include automatic shut off timing and temperature unit displayed. Automatic shut-off options are to turn the water pH meter off after 8 minutes, 60 minutes, or disabled. To enter the setup mode the user presses a button located in the battery compartment.
HANNA pHep pH-Tester
- slim, ergonomic Design
- large multi-level LCD
- two-button operation
- integrated temperature sensor
- automatic calibration
- stability indicator
- automatic shut-off
- low battery indicator
- battery % level at atartup
technical Data HANNA pHep pH Tester
pH Ranges 0.0 to 14.0 pH
pH Resolution 0.1 pH
pH Accuracy (@25°C/77°F) ±0.2 pH
pH Calibration automatic, two-points
pH Temperature Compensation automatic, 0 to 50 °C
Temperature Range 0.0 to 50.0 °C
Temperature Resolution 0.1 °C
Temperature Accuracy ±0.5 °C
Automatic Shut-Off 8 minutes, 60 minutes, or can be disabled
Battery Type: CR2032 3V Li-ion
battery life time: approximately 800 hours of continuous use
Environment 0 to 50°C (32 to 122°F), RH 100% max
Dimensions 160 x 40 x 17 mm (6.3 x 1.6 x 0.7Â’Â’)
Weight 75 g - slim, ergonomic Design
- Accessories for this article:
-
Reviews for HANNA pHep pH Tester:
Write a reviewPatrick M. at 29.12.2015:
Sehr nützliches,kostengünstiges und genaues Teil! Gerne wieder;)
- GABI L. wrote about HANNA pHep pH Tester in 2018:
it is included te calibretion liquid?
Aquaristikshop.com: Calibration fluids are not included.- GABI L. wrote about HANNA pHep pH Tester in 2018:
it is included te calibretion liquid?
Aquaristikshop.com: Calibration fluids are not included.