technical Data Aqua Medic multi reactor - Gen II M. for aquariums up to 500 l. power consumption: 12V/ 8 W. dimensions: 80 x 60 x 390 mm. glass thickness up to 12 mm. Aqua Medic multi reactor Gen II is designed to operate either directly inside the aquarium or inside the filter sump. With the supplied holding unit, the multi reactor can be mounted horizontally on the aquarium glass. The pump needs to be fully submerged to prevent air suction.
 |
Actual product may vary from the image shown.
-
technical Data Aqua Medic multi reactor - Gen II M
for aquariums up to 500 l
max. filling qty.: 540 ml
pump output: 350 l/h
power consumption: 12V/ 8 W
dimensions: 80 x 60 x 390 mm
glass thickness up to 12 mmAqua Medic multi reactor Gen II is designed to operate either directly inside the aquarium or inside the filter sump. With the supplied holding unit, the multi reactor can be mounted horizontally on the aquarium glass. The pump needs to be fully submerged to prevent air suction. The entire body may only be submerged maximum up to the outlets on top of the unit. The immersion depth of the unit can be adjusted by opening the clamp screw. If the reactor cannot be put deeply enough into the water due to a low water level, splashing noises can occur. By turning the new water level control, the water in the reactor can be accumulated which minimizes splashing noises.
Aqua Medic multi reactor - Gen II M
- for use in the aquarium or filter sump
- space-saving due to internal water supply
- highly efficient filtration due to high flow through your chosen filter media
- adjustable water flow
- very simple maintenance due to removable filling tube, the filter housing incl. Pump can remain in the aquarium for refilling and maintenance
- incl. Pump of 12 V safety tension
- flexibly adjustable mounting system
- multi reactor L can also be placed upright in the filter sump
- extremely quiet in operation
- low vibration due to a decoupled pump connection
- pptimized water flow with adjustable water level, low noise
- due to the new double-chamber-system two different types of filter media can be used simultaneously
- single-chamber-operation is also possible by removing the separating bottom of the reaction chamber
- for use in the aquarium or filter sump
-
Reviews for Aqua Medic multi reactor - Gen II M:
Write a review
Manual Aqua Medic multi reactor - Gen II M
Your question: Aqua Medic multi reactor - Gen II M
