Aqua Medic DC Runner 9.3

Aqua Medic DC Runner 9.3

universal pump with App-control, 9000 l/h

✔ in stock, delivery until 13.11. - 18.11.

		Price
		257.85 EUR

Quantity:   280.65 USD

▶ do you have questions about this article?
▶ to the website of the manufacturer
2 Reviews

Price including VAT plus shipping costs

Shipping to USA (change region)

     

• Description Accessories (2) Reviews (2)
• technical Data Aqua Medic DC Runner 9.3:
  transparency pump housing
  0-10 V connection for external control
  Pump output: up to 9000 l/h
  max. pump height: 4.8 m
  max. Power consumption: 65 W
  Power supply pump: 24 V
  Power supply transformer: 110-240 V/50-60 Hz
  Connector suction side: 40 mm
  Connector pressure side: 40 mm
  Protection rating: IPX8
  Dimensions without basket: 180x95x135 mm
  suitable for fresh and marine water
  can be installed fully submerged or out of water
  

  The Aqua Medic DC Runner 9.3 is a powerful universal pump for use in fresh and marine water aquaria. The Aqua Medic DC Runner is a magnetically coupled current pump and have a fully encapsulated synchronous motor. All materials are salt-water resistant. The pump is operated at 24 V DC safety voltage, with the transformer included. The Aqua Medic DC Runner 9.3 is controlled via Aqua Medic DC Runner Controller which allows for running a variety of different levels. In addition to control via controller, control via app with smartphone or tablet is possible. The Aqua Medic DC Runner pump is suitable for installation under water and out of water.

  Aqua Medic DC Runner Controller The included DC Runner Controller is switched between power supply and pump to adjust the output. The power can be adjusted by pressing the +/- buttons, the level is displayed by LED. If you press the button -FEED-, the output will stop for 10 minutes. There is an automatic shut off if there is no water for 2 minutes. An extension cable with 1.80 m in the length is optionally available. With this cable you can extend the cable between pump and controller.

  Aqua Medic DC Runner 9.3
  

  1. for use as a circulation or current pump in salt or freshwater aquaria
     
  2. incl. controller for adjusting the water output
     
  3. control and programming via App (iTunes and Google Playstore) or manually via the controller
     
  4. 0-10 V-connection for external control
     
  5. ULTRA SILENT due to optimized control electronics
     
  6. rugged pump housing
     
  7. power-saving D/C motor 24 Volt, high efficiency
     
  8. polished ceramic shaft and bearings for quiet operation and low maintenance
     
  9. submerged and non-submerged use is possible
     

  Manual Aqua Medic DC Runner 9.3
  

  Shipping to:

  Germany---AndorraAustraliaAustriaAzerbaijanBelgiumBelrausBosniaBrazilBulgariaCanadaChinaCroatiaCyprusCzechiaDenmarkEstoniaFinlandFranceGermanyGreeceHong KongHungaryIcelandIndiaIndonesiaIrelandIsraelItalyJapanKazakhstanLatviaLiechtensteinLithuaniaLuxembourgMacedoniaMaltaMexicoMoldovaMonacoMontenegroNetherlandsNew ZealandNorwayPolandPortugalQatarRomaniaRussiaSaudi ArabiaSerbiaSingaporeSlovakiaSloveniaSouth KoreaSpainSwedenSwitzerlandTurkeyUKUSAUkraineUnited Arab Emirates---Worldwide

  Your question: Aqua Medic DC Runner 9.3

  Aqua Medic DC Runner 9.3   Please enter your question:   Your e-mail address:   Firname: Lastname:

  Do you have questions about this article?
• Accessories for this article:
  

  
  

  Aqua Medic Connection Cord DC 0-10 V 17.95 €	Aqua Medic Extension Cable DC Runner/EcoDrift 13.85 €

• Reviews for Aqua Medic DC Runner 9.3:
  Write a review

  Top G. at 14.11.2022:
  Laut und schwach? Der Kollege unter mir muss eine andere Pumpe erhalten haben. Die DC Runner 9.3 ist wahnsinnig stark was Druck und Durchfluss angeht und dabei sehr angenehm leise und effizient.

  ---

  Annett S. at 02.12.2018:
  Leider etwas schwach und laut

  ---