Aqua Medic Titan coolers with titanium heat exchangers maintain water temperature in aquariums, available in 4 sizes and FCKW-free.
 |
-
The new Aqua Medic Titan coolers are supplied with heat exchanger made from salt water proof Titanium steel. These heat exchangers are corrosion-resistant and free of contaminations. The cooling units can be used in fresh and salt water as well as in various chemicals. The Aqua Medic Titan coolers have a one-phase cooling system containing the cooling medium R 134 a (FCKW-free). They work with capillary injection as control system. Titan coolers are available in 4 different sizes. You can maintain a temperature of 24 °C - 27 °C constant in a small aquarium up to an aquarium of 2,500 l. A digital temperature controller ensures that the adjusted temperature is exactly controlled. The control range is from 3 °C to 32 °C.
Aqua Medic Cooling Unit Titan
- coller for freshwater an marine water aquariums
- simple and convenient operation with a microcomputer-controlled system
- high efficiency and economy due to the rapidly falling water temperature
- the use of titanium heat exchangers ensures corrosion-free operation for a long service life
- high level of protection for animals and plants due to permanent automatic adjustment of the water temperature
- easy installation, fittings supplied
- solid housing in stylish design made of PVC/ABS
technical data
Titan 200
for aquariums up to 250 l
compressor power: 0,1 HP
noise development: 51.9 db
power uptake: 160 W
cooling power: 200 W
recommended water flow: 250-1200 l/h
cooling gas: R134a (150g)
Dimensions: 430x255x380 mm (LxWxH)
hose connector: 1/2 inch or 5/8 inch
voltage: 220-240 V/50 HzTitan 600
for aquariums up to 750 l
compressor power: 0,25 HP
noise development: 48.4 db
power uptake: 345 W
cooling power: 600 W
recommended water flow: 1000-2500 l/h
cooling gas: R134a (150g)
Dimensions: 457x330x430 mm (LxWxH)
hose connector: 3/4 inch
voltage: 220-240 V/50 HzTitan 1600
for aquariums up to 1500 l
compressor power: 0,5 HP
noise development: 47 db
power uptake: 480 W
cooling power: 800 W
recommended water flow: 1200-3000 l/h
cooling gas: R134a (300g)
Dimensions: 480x355x480 mm (LxWxH)
hose connector: 3/4 inch or 1 inch
voltage: 220-240 V/50 HzTitan 2200
for aquariums up to 2500 l
compressor power: 1 HP
noise development: 64.3 db
power uptake: 550 W
cooling power: 1600 W
recommended water flow: 1500-4000 l/h
cooling gas: R134a (640g)
Dimensions: 560x380x480 mm (LxWxH)
hose connector: 1 inch or 1 1/4 inch
voltage: 220-240 V/50 Hz - coller for freshwater an marine water aquariums
-
Reviews for Aqua Medic Cooling Unit Titan:
Write a reviewChristoph P. at 09.07.2020:
Ich habe ihn zwar Second Hand aber er läuft tadellosKurt L. at 21.06.2019:
Der Kühler läuft bei mir jetzt seit Monaten - einwandfrei.
Manual Aqua Medic Cooling Unit Titan
Your question: Aqua Medic Cooling Unit Titan
- Elena P. wrote about Aqua Medic Cooling Unit Titan in 2018:
Good day,
please advice the hose diameters(inner) for Titan 150 and 500 chillers. Other models could be useful at the page as well. Thank you.
Best regards,
Elena.
Aquaristikshop.com: Titan 150 - 14 mm 1/2" or 20 mm 3/4"
Titan 500 and 1500 - 20 mm 3/4" or 25 mm 1"
Titan 2000 - 20 mm 3/4" or 25 mm 1"
Titan 4000 - 32 mm 1 1/4" or 37 mm 1 1/2"
